HP VMA-series Memory Array Installation and Service Guide

Chapter 4 - Configuring the Array
58 VMA-series Memory Array Installation and Service Guide HP-AM456-9002A Rev 01
Memory Array Default Settings
The Memory Array has the system default settings listed in Table 4.1. Change
these settings using the CLI over a Telnet/SSH session or the serial port on the
Memory Array. See Changing the Default System Settings on page 62.
Table 4.1 Memory Array System Default Settings
Setting Default Value
Host Name violin
IP Address 192.168.1.2 (static)
IP Netmask 255.255.255.0
Gateway undefined
DHCP disabled
User Login Name admin
User Password admin
DNS Config manual
DNS Name Server undefined
DNS Search undefined
Clock Source host
Shell Connectivity Serial, Telnet (port 23), SSH (port 22)
Serial Port Settings 9600 Baud, No Parity, 8 bits, 1 stop
System Log (syslog) disabled
Message Logging Level info
Command Line Editor emacs
CLI Window Columns 80
Usable VIMM Capacity 65%