HP VMA-series Memory Array Installation and Service Guide

System Context Commands
HP-AM456-9002A Rev 01 VMA-series Memory Array Installation and Service Guide 257
System Context Commands
Figure D.15 System Context Level
The table below describes the commands available at the System context level
of the CLI.
Table D.17 System Context Commands
Command Description
cancel reboot Cancels the scheduled reboot.
clear log Clears the log buffer.
context alarms Moves into the Alarms context level. See
Alarms Context Commands on page 273.
context all Moves into the all context level.
context boot-params Moves into the boot-params context level.
context led-state Moves into the LED State context level. See LED-
state Context Commands on page 277.
context logging Moves into the Logging context level. See
Logging Context Commands on page 279.
context oam Moves into the oam context level
context status Moves into the Status context level. See Status
Context Commands on page 290.
context sw-upgrade Moves into the Sw-upgrade context level. See
Sw-upgrade Context Commands on page 294.
context uptime Moves into the Uptime context level. See
Uptime Context Commands on page 297.
context version Moves into the Version context level. See
Version Context Commands on page 298.
save log Saves the system log to a host.