HP VMA-series Memory Array Installation and Service Guide

Preface
18 VMA-series Memory Array Installation and Service Guide HP-AM456-9002A Rev 01
– Chapter 7, Linux Drivers—Describes how to install, use, and remove the
Linux drivers on a host computer directly attached to the Memory
Array.
– Chapter 8, Windows Drivers—Describes how to install, use, and remove
the Windows drivers on a host computer directly attached to the
Memory Array.
– Chapter 9, Violin Utilities—Describes the Memory Array utility
commands and how to use them.
– Chapter 10, Performance Tuning and Troubleshooting—Describes how
to perform performance tuning and testing on the Memory Array.
• Appendix A, Product Models—Lists the various Memory Array model
configurations.
• Appendix B, Compliance Information—Contains compliance notices and
information for the Memory Array.
• Appendix C, Alarm Reference—Describes the various system alarms that
may occur when using the Memory Array.
• Appendix D, CLI Reference—Describes the commands available in the
Memory Array command line interface.
Document Conventions
Safety Icons
The table below summarizes warning, caution, and note icons used in this
document and includes sample text.
Safety Icons
Icon Sample Text
WARNING! WARNING! Only authorized, qualified, and trained
personnel should attempt to work on this equipment.
Caution: Caution: Follow the listed safety precautions when
working on the Memory Array.
Note: Note: Read through this entire chapter and plan
your installation according to your location before
installing the equipment. The following procedures and
the order in which they appear are general installation
guidelines only.