HP VMA-series Memory Array Installation and Service Guide

Installing Windows Drivers
HP-AM456-9002A Rev 01 VMA-series Memory Array Installation and Service Guide 143
The Windows system installs the drivers. A confirmation dialog box confirms
that the driver was correctly installed.
9. Reboot the host.
10.Log into the host as administrator.
The Found New Hardware window appears, The window verifies that the
Memory Array is properly connected to the host and is ready to be
configured.
11.Select the No, Not This Time option and proceed with the installation of the
Windows device driver.
For step-by-step instructions, see Installing the Violin Utilities on page 144.
Verifying Host Computer Connections
1. After installing the Windows Storport driver and rebooting the system, log
into the host as
administrator.
The Found New Hardware window appears. The window verifies that the
Memory Array is properly connected to the host and is ready to be
configured.
2. Select the No, Not This Time option and proceed with the installation of the
Windows device driver.
For step-by-step instructions, see Installing the Violin Utilities on page 144.
Removing the Windows Drivers
1. Log into the host as administrator.
2. Open the Control Panel.