HP Insight Dynamics - VSE 6.0 Integrity CMS Installation and Configuration Guide

vseinitconfig(1M)
NAME
vseinitconfig -- Configure or unconfigure Insight Dynamics
SYNOPSIS
Path (HP-UX): /opt/vse/bin/vseinitconfig
Path (Windows): install-path\bin\vseinitconfig
vseinitconfig [ -a | --initconfig ] [ -F | --clobber ] [ -q | --quiet ]
[-x restart_sim= { true | false }]
(Initial software configuration)
vseinitconfig { -r | --unconfig } [ -F | --clobber ] [ -q | --quiet ]
[-x restart_sim= { true | false }]
(Unconfigure software for removal)
vseinitconfig { -b | --backup } { -d path | --dir=path }
(Backup the PostgreSQL database on HP-UX CMS)
vseinitconfig { -s | --restore } { -d path | --dir=path } { -F | --clobber }
(Restore the PostgreSQL database on HP-UX CMS)
DESCRIPTION
The vseinitconfig command performs initial configuration of Insight Dynamics on an HP
Systems Insight Manager (SIM) Central Management Server (CMS). It can also be used to remove
the existing configuration and to back up or restore Insight Dynamics database. (Backup and
restore functions are only available on a CMS running HP-UX using the PostgreSQL database.).
The vseinitconfig command is installed with Insight Dynamics on both HP-UX and
Microsoft® Windows® CMS.
This command performs four different functions on the CMS, corresponding to the four syntax
options shown in the synopsis. With no options specified, the initial configuration function is
performed.
1. Initial configuration after installing or updating Insight Dynamics on the CMS. This includes
initial configuration of HP Insight Virtualization Manager software, HP Insight Global
Workload Manager software for Integrity (gWLM), and HP Insight Capacity Advisor
software, as well as initialization of the Insight Dynamics database.
2. Removal of Insight Dynamics menu items and actions from HP SIM and clearing of the
Insight Dynamics database, in preparation for removal of Insight Dynamics.
3. Safe backup of the Insight Dynamics database to protect against loss of data (only on a CMS
running HP-UX using the PostgreSQL database).
4. Safe restore of the Insight Dynamics database from a previous backup (only on a CMS
running HP-UX using the PostgreSQL database).
Options
The vseinitconfig command recognizes the following options. Each option can be expressed
in a long or short form.
If no options are specified, the initial configuration function is performed.
-a|--initconfig
Perform the initial configuration of Insight Dynamics (this
is also the default function performed if no option is
specified). This action requires that HP SIM is running and
configured with the mxinitconfig command. This
command registers Insight Dynamics tools, toolboxes, and
actions with HP SIM and initializes the Insight Dynamics
database.
On a Microsoft Windows CMS, vseinitconfig -a is
automatically invoked by the installer. On an HP-UX CMS,
38 Command reference