Instant Capacity on Demand (iCOD) User's Guide for versions B.05.x

iCOD Cell Board

Chapter 9108

Accidental Activation of an iCOD Cell Board

If you inadvertently activate an iCOD cell board, you can de-activate it

by following this two step procedure:

Step 1. Set the iCOD cell board’s use-on-next-boot flag to “n”

Step 2. Perform a reboot of the nPartition

IMPORTANT You must deactivate the inadvertently activated cell board within five

days or the cell board is considered to be purchased from HP.

Example 9-4 Deactivating an iCOD cell board in cabinet 0, slot 5, nPartition 3

For example, changing the use-on-next-boot flag to “n” on the iCOD

cell board in cabinet 0, slot 5, in nPartition 3 can be accomplished via the

following command:

/usr/sbin/parmodify -p 3 -m 0/5::n:

The “n” in the above command line sets the cell board’s

use-on-next-boot flag to “no” and causes the cell board to not

participate in the nPartition when it is booted.

See the HP System Partitions Guide for details about adding and

configuring cells in nPartitions.