StoreEver LTO SAS half height tape drives user guide
1 Before you start
In this chapter:
• Your LTO Ultrium tape drive (page 6)
• Which operating systems are supported? (page 6)
• Power specifications (page 7)
• How do I connect the drive to my server? (page 7)
• HP Storage SPOCK (page 9)
• Using the HP Tape CD-ROM (page 11)
• LTFS and HP StoreOpen Standalone (page 11)
Your HP StoreEver LTO Ultrium tape drive
This guide describes how to install and operate the following HP StoreEver LTO Ultrium tape drives:
• HP StoreEver LTO-6 Ultrium 6250 internal and external tape drives
• HP StoreEver LTO-5 Ultrium 3000 internal and external tape drives
• HP StoreEver LTO-4 Ultrium 1760 internal and external tape drives
• HP StoreEver LTO-3 Ultrium 920 internal and external tape drives
• HP StoreEver LTO-2 Ultrium 448 internal and external tape drives
For a detailed product specification, please refer to our website (http://www.hp.com/go/tape).
Figure 1 Front view of LTO Ultrium external tape drive
5. Tape LED1. Cartridge door
6. Drive LED2. On/Off switch (external drives only)
7. Ready LED3. Encryption LED (LTO–6 and LTO–5 only)
8. Eject button4. Clean LED
NOTE: LTO-4 and earlier tape drives do not have an Encryption LED.
Which operating systems are supported?
HP LTO Ultrium drives can be connected to servers running under Windows®, Linux, UNIX and
other major operating systems. Refer to the QuickSpecs available from the product website or to
6 Before you start