HP Systems Insight Manager 6.0 Command Line Interface Guide

not support a network connection. The MPO must also be able to support defining a path to obtain SNMP

data for a server via an iLO for cases in which a server is in a DMZ with the iLO on a management network.

The two types of MPOs that might reside on a node are a Management Agent (MAO) and a Management

Route (MRO).

An MAO defines and supports a management agent such as a CIMOM or SNMP agent. The MAO contains

information specific to accessing the agent, which includes attributes such as agent type, port number, and

the IP address by which it was accessed.

An MRO provides the information required to access an agent (MAO). An MRO always has an associated

MAO included in its overall information. An MRO on a node points to an MAO residing on the same node,

or another node.

The following sample XML list shows a node with one MAO and one MRO residing on the node. A node's

MPOs are included in the XML within the <managementpath-list> block. Within this list block, each

MPO is included in its own <managementpath> block, where an

mpotype

attribute defines an MRO, MPO,

or MAO type. The MRO in the following sample has an associated MAO that resides on another system.

Adding, modifying, or removing MPO data for a node is available only through the mxnode CLI

modify

option which requires the MPO data to be provided via XML input. See the mxnode(4) manpage for more

information about using an XML file to add or modify a node's MPO data.

<node-list>

<hw-attribute name="DeviceType">Server</hw-attribute>

<sw-attribute name="PreferredNodeName">abc</sw-attribute>

<sw-attribute name="OverallStatus">NORMAL</sw-attribute>

<sw-attribute name="IPAddress">nn.nn.nnn.nn</sw-attribute>

<sw-attribute name="ProtocolSupport">WBEM:1.0</sw-attribute>

<sw-attribute name="ProtocolSupport">SNMP:1.0</sw-attribute>

<sw-attribute name="discovery.source">Ping</sw-attribute>

<sw-attribute name="DefaultProtoSettings">true</sw-attribute>

<sw-attribute name="DefaultAttributeSettings">true</sw-attribute>

<sw-attribute name="DefaultSystemName">true</sw-attribute>

<managementpath-list totalmpos="2">

<managementpath mpotype="MAO" mpoversion="1.0" maotype="WBEM_CIMOM"

location="OnThisNode">

<proxytype>WBEM_CIMOM</proxytype>

<protocol>https</protocol>

<maoluid>nnnnnnnnnnn</maoluid>

<interopnamespace>interop</interopnamespace>

<profilename>Array</profilename>

<profilename>Server</profilename>

</profilelist>

<profilename>Basic Read</profilename>

<profilename>Basic Write</profilename>

</functionalprofilelist>

64 Command descriptions