11.0 HP StoreVirtual LeftHand OS Command Line Interface User Guide (AX696-96291, September 2013)

DescriptionName

The CHAP initiator secret for the volume.[initiatorSecret]

The IP address of the client server that has Application Aware Snapshot

Manager (AASM) installed on it. It will coordinate the snapshot with the

[controllingserver]

applications using SAN volumes. This is required for managed snapshots of

Fibre Channel connected volumes. This is also required for VMware managed

snapshots; if applicable, enter the Virtual Center Server IP address.

Allow Fibre Channel ports to be assigned to the client. Values are 0—Disable

and 1—Enable. If volumes are attached to a client server via Fibre Channel

[allowfcaccess]

and a value of 0 is entered, the client will lose its ability to communicate with

the attached volumes.

A semicolon delimited list of the unique World Wide Port Names for one or

more Fibre Channel ports. Expected WWPN formatting is 16 Hex characters

[wwpn]

with or without the : character as a delimiter. For example:

20:21:00:0E:B3:01:AB:C6 or 2021000EB301ABC6. Lower case hex

characters a-f are also accepted.

The LUN (1–255) of the boot volume. Valid only for a Fibre Channel attached

volume. If present, then bootvolumename must also be specified.

NOTE: LUN 255 is not supported by Microsoft Windows.

[bootvolumelun]

The volume name of the boot volume. Valid only for a Fibre Channel attached

volume. If present, then bootvolumelun must also be specified.

[bootvolumename]

Example 168 Windows

cliq modifyServer serverName=TheServer useCHAP=0

initiator=iqn.1991-05.com.microsoft:w-gregorio.corp.mynetworks.com

Example 169 SSH

modifyServer serverName=TheServer useCHAP=0

initiator=iqn.1991-05.com.microsoft:w-gregorio.corp.mynetworks.com

modifySite

Description

Modify a site in a multi-site SAN.

CAUTION:

• This operation is irreversible.

• This command will display a prompt, requiring confirmation before proceeding. This prompt

may be overridden with an optional prompt=0 parameter on the command line; in this case,

the command will always execute without pausing for confirmation.

Syntax

modifySite {login=} { userName= passWord= | groupName= } {siteName=} [node=]

[description=] [primary=]

88 Commands