11.0 HP StoreVirtual Storage User Guide (AX696-96275, December 2013)

New Snapshot window. You can create application-managed snapshots for both single and
scheduled snapshots. See the HP StoreVirtual Storage Application Aware Snapshot Manager
Deployment Guide for server-side requirements for installing and configuring the Application Aware
Snapshot Manager.
The following are required for application-managed snapshots:
Table 55 Prerequisites for application-managed snapshots
VMwareWindowsAll
• LeftHand OS software 9.5 or later
for VMware application-managed
snapshots
• LeftHand OS software 8.5 or later
for Windows application-managed
snapshots
• CMC or CLI latest update
• HP StoreVirtual Application
Integration Solution Pack,
•• CMC Server configured with iSCSI
connection that must use the IP
Microsoft iSCSI initiator
specifically the HP StoreVirtual
Application Aware Snapshot
address of the vCenter Server as the
Controlling Server IP address
Manager (latest update) installed
on the application server (See the
HP StoreVirtual Storage Application
• vSphere Server software iSCSI
initiator
Aware Snapshot Manager
Deployment Guide)
• Management group authentication
set up for the Application Aware
Snapshot Manager (see the HP
StoreVirtual Storage Application
Aware Snapshot Manager
Deployment Guide)
• Application on the server that is
can be quiesced
• Server configured with iSCSI
connection (see “Controlling server
access to volumes” (page 199))
Application-managed snapshots for volume sets
When you create an application-managed snapshot of a volume in a volume set, the software
recognizes that the volume is part of a volume set, and prompts you to create a snapshot for each
volume in the volume set. The result is a snapshot set that corresponds to the volume set. To see
any associated snapshots, select a snapshot, click the Details tab, and look at the Snapshot Set
field.
NOTE: After you create snapshots for a volume set, typically you do not want to delete individual
snapshots from the snapshot set. You want to keep or delete all snapshots for the volume set. If
you need to roll back to a snapshot, typically you want to roll back each volume in the volume set
to its corresponding snapshot. The system gives you the option to automatically delete or roll back
all associated volumes.
Creating snapshots
Create a snapshot to preserve a version of a volume at a specific point in time. For information
about snapshot characteristics, see “Configuring snapshots” (page 163). For information about
types of snapshots available, including regular or point-in-time, and application-managed, see
“Types of snapshots” (page 162).
Creating an application-managed snapshot, with or without volume sets, requires the use of the
Application Aware Snapshot Manager. The application-managed snapshot option quiesces
Windows and VMware applications on the server before creating the snapshot. For more
information, see “Prerequisites for application-managed snapshots” (page 163). If the Application
Aware Snapshot Manager is not installed, the LeftHand OS software creates a regular, point-in-time
snapshot.
164 Using snapshots