11.0 HP StoreVirtual Storage Application-Aware Snapshot Manager Deployment Guide (AX696-96318, September 2013)

Figure 2 Opening the Credentials Wizard
Do one of the following:
• Use the default credentials by selecting Use default credentials.
NOTE: If Use default credentials is disabled, then default credentials have not been
defined. Default credentials can be added by canceling the Credentials Wizard and
selecting Action→New Default Credentials from the menu bar.
• Enter the user name, password, and confirm the password.
4. Click Test.
5. In the Test window, enter either an IP address associated with a storage system in the
management group, or the virtual IPs (VIPs) of the clusters in the management group. Use
semicolons (;) to separate IP addresses in the list.
TIP: HP recommends that you enter the VIPs. Entering the VIPs ensure that Application Aware
Snapshot Manager continues to display management group information if a storage system
in the management group is inaccessible.
6. In the Test window, click OK.
If the test is successful, a corresponding message is displayed under the Test button on the
Credentials Wizard window.
Setting management group credentials 9