HP StoreOnce B6200 Maintenance and Service Guide (February, 2014)

1. Use a Cat 5E or Cat 6 1GbE cable to plug your laptop into a spare 1GbE port on the internal
network switches in Rack 1.
Available ports depend upon the number of racks and couplets in the configuration, however,
ports 13 to 16 should be available.
NOTE: Do not use the internal network switches in Rack 2 because they contain 10GbE
ports only and are not suitable for this type of connection.
2. Wait for the ethernet link to be established. (Both green and amber LED on the ethernet
connector are on.)
3. Set the laptop network settings to DHCP. You should now have an IP on your laptop in the
range 10.154.x.x.
In Microsoft Windows OS, you can check this in a cmd window by typing ipconfig
4. Using a supported web browser check access to the GUI via 10.154.1.1 (Management VIF)
5. Open the puTTY (or other ssh) application and log into the node with the Active Management
Console, which is 10.154.1.1, using the Administrator account.
Account: Admin
Password: admin
(This is the default password, the customer may have changed it.)
Onsite and offsite troubleshooting and repair 15