Web Tools Administrator's Guide (53-1001772-01, June 2010)

168 Web Tools Administrator’s Guide
53-1001772-01
Access Gateway limitations on the Brocade 8000
12
DRAFT: BROCADE CONFIDENTIAL
4. In the Switch Explorer window, select Switch Admin. The Switch Administration window
displays (Figure 52).
FIGURE 52 Access Gateway Auto Rebalancing
5. Click Refresh.
6. Under the Access Gateway Mode section, do the following:
• Select the N Port Auto Rebalancing check box to enable N_Port rebalancing.
• Select F Port Auto Rebalancing check box to enable F_Port rebalancing.
• Click Manual Balancing and a confirmation dialog box displays. Click Yes to change F
Port-N Port Mapping or click No to cancel the changes.
7. Cl ick Apply to apply the changes.
Access Gateway limitations on the Brocade 8000
The following list the is a compilation of the limitations of using Access Gateway with the Brocade
8000 switch:
• Only the Port Grouping (PG) policy is supported. When the Access Gateway mode is first
enabled, the default PG policy is enforced.