HP StorageWorks Fabric OS 6.2 administrator guide (5697-0016, May 2009)

Fabric OS 6.2 administrator guide 45
ICL licensing
ICL ports can be used only with an ICL license. After the addition or removal of a license, the license
enforcement is performed on the ICL ports only when the portDisable and portEnable commands
are entered on the ports. An ICL license must be installed on both HP StorageWorks DC SAN Backbone
Director and HP StorageWorks DC04 SAN Director Switch forming the ICL connection.
8G licensing
IMPORTANT: This license is installed by default. Do not remove it.
The 8 Gb/s licensing applies to the HP StorageWorks 8/8 and 8/24 SAN Switch, HP StorageWorks
8/40 SAN Switch, and HP StorageWorks 8/80 SAN Switch. The following list describes the basic rules of
using, adding, or removing 8G licenses.
Without an 8G license, even if there is an 8 Gb/s SFP plugged into a port in an applicable platform,
the port would be enabled to run at a maximum speed of 4 Gb/s.
To obtain an 8G license, only the License ID from the switch is required. When you add the 8G license,
enter either the portDisable and portEnable commands on each individual port on the switch, or
the switchDisable and switchEnable commands must be entered on the switch to enable the 8
Gb/s functionality.
When you remove the 8G license, the ports which are online and already running at 8 Gb/s are not
disturbed until the port goes offline or the switch is rebooted. The switch ports return to their
pre-licensed state maximum speed of 4 Gb/s.
Speed 8 Gb/s license needed to support 8 Gb/s
on the HP StorageWorks 8/8 and 8/24
SAN Switch, HP StorageWorks 8/40 SAN
Switch, and HP StorageWorks 8/80 SAN
Switch only.
This license is installed by default and you
should not remove it
Local switch
SSH public key No license required. n/a
Top Talkers Advanced Performance Monitoring Local switch and attached
switches.
Traffic isolation No license required. n/a
Trunking ISL Trunking or
ISL Trunking Over Extended Fabrics
Local and attached switches.
Two-to-four domains in
a fabric
Value Line (Two/Four) Local switch. May be required on
attached switches.
USB usage No license required. n/a
Virtual Fabrics No license required. n/a
Web Tools No license required. Local and any switch you want to
manage using Web Tools.
Zoning No license required. n/a
Table 4 License requirements (continued)
Feature License Where license should be
installed