HP StorageWorks Fabric OS 6.2 administrator guide (5697-0016, May 2009)

260 Administering advanced zoning
4. Enter the cfgShow command to verify that the new zone object is present.
switch:admin> cfgshow "Test*"
cfg: Test1 Blue_zone
cfg: Test_cfg Purple_zone; Blue_zone
switch:admin> cfgShow "US_Test1"
cfg: US_Test1
Blue_zone
5. If you want the change preserved when the switch reboots, enter the cfgSave command to save it to
nonvolatile (flash) memory.
6. Enter the cfgEnable command for the appropriate zone configuration to make the change effective.
Deleting a zone object
The following procedure removes all references to a zone object and then deletes the zone object. The
zone object can be a zone member, a zone alias, or a zone.
1. Connect to the switch and log in as admin.
2. Enter the cfgShow command to view the zone configuration objects you want to delete.
switch:admin> cfgShow
Defined configuration:
cfg: USA_cfg Purple_zone; White_zone; Blue_zone
zone: Blue_zone
1,1; array1; 1,2; array2
zone: Purple_zone
1,0; loop1
zone: White_zone
1,3; 1,4
alias: array1 21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02
alias: array2 21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28
alias: loop1 21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df
Effective configuration:
cfg: USA_cfg
zone: Blue_zone
1,1
21:00:00:20:37:0c:76:8c
21:00:00:20:37:0c:71:02
1,2
21:00:00:20:37:0c:76:22
21:00:00:20:37:0c:76:28
zone: Purple_zone
1,0
21:00:00:20:37:0c:76:85
21:00:00:20:37:0c:71:df
3. Enter the zone
--expunge command to delete the zone object. Note that zone configuration names
are case-sensitive; blank spaces are ignored and the command works in any Admin Domain other than
AD255.
switch:admin> zone --expunge "White_zone"
You are about to expunge one configuration
or member. This action could result in removing
many zoning configurations recursively.
[Removing the last member of a configuration removes the configuration.]
Do you want to expunge the member? (yes, y, no, n): [no] yes