HP StorageWorks Fabric OS 6.1.x administrator guide (5697-0234, November 2009)

Fabric OS 6.1.x administrator guide 441
FICON performance statistics
You can use the portshow ficon command to view the performance statistics and monitor the behavior
of FICON emulation. The syntax is as follows.
portShow ficon [Slot/]ge0|ge1 all|tunnel_id [arguments]
Where:
slot The slot number of a blade in a multi-slot chassis. Does not apply to the MP 400
Router.
ge0|ge1 The Ethernet port (ge0 or ge1).
tunnel_id Tunnel number (0-7).
arguments are as follows:
-globals General FICON Controls/Statistics.
-images Discovered Images (FCUB).
-emul Emulated FDCBs.
-active Active FDCBs.
-epcb Emulation Control Block (port specific).
-fhpb FICON Host Path Block.
-fdpb adrs FICON Device Path Block.
-fchb FICON Channel Control Block.
-fcub FICON Control Unit Control Block.
-fdcb adrs FICON Device Control Block.
-mem adrs Display 1250 memory in 256 byte increments.
-pools Display current data buffer pool counts.
-pmmr Displays PMMR pointers.
-clear Clears statistics.
The -emul argument may be used to Monitor FICON emulation activities (see ”Monitoring FICON
emulation” on page 442). The other arguments are primarily for support personnel.