Brocade Fabric OS Troubleshooting and Diagnostics Guide v6.2.0 (53-1001187-01, April 2009)

Fabric OS Troubleshooting and Diagnostics Guide 119
53-1001187-01
Appendix
B
Hexadecimal
Hexadecimal, or simply hex, is a numeral system with a base of 16, usually written using unique
symbols 0–9 and A–F, or a–f. Its primary purpose is to represent the binary code that computers
interpret and represent in a format easier for humans to read. It acts as a form of shorthand, in
which one hexadecimal digit stands in place of four binary bits. For example, the decimal numeral
79, whose binary representation is 01001111, is 4F (or 4f) in hexadecimal (4 = 0100, F = 1111).
Hexadecimal numbers can have either an 0x prefix or an h suffix.
0xFFFFFA
is the same address as,
FFFFFAh
This type of address is called a hex triplet. Fibre Channel uses hexadecimal notation in hex triplets
to specify well-known addresses and port IDs.
Example of conversion from hexadecimal triplet to decimal triplet. hexadecimal triplet: Ox616000
Notice the PID in the nsshow output is in hexadecimal.
Switch:admin> nsshow
{
Type Pid COS PortName NodeName TTL(sec)
N 610600; 2,3;10:00:00:00:c9:29:b3:84;20:00:00:00:c9:29:b3:84; na
FC4s: FCP
NodeSymb: [36] "Emulex LP9002 FV3.90A7 DV5-5.10A10 "
Fabric Port Name: 20:08:00:05:1e:01:23:e0
Permanent Port Name: 10:00:00:00:c9:29:b3:84
Port Index: 6
Share Area: No
Device Shared in Other AD: No
Redirect: No
The Local Name Server has 1 entry }
1. Separate the triplets: 61 06 00
2. Convert each hexadecimal value to a decimal representation:
61 = Domain ID = 97
06 = Area (port number) = 06
00 = Port (ALPA) = 0 (not used in this instance, but is used in loop, NPIV, and Access Gateway
devices)
Result: hexadecimal triplet 610600 = decimal triplet 97,06,00
TABLE 19 Decimal to Hex conversion table
Decimal 01 02 03 04 05 06 07 08 09 10
Hex 01 02 03 04 05 06 07 08 09 0a