Brocade Fabric OS Troubleshooting and Diagnostics Guide v6.2.0 (53-1001187-01, April 2009)

116 Fabric OS Troubleshooting and Diagnostics Guide

53-1001187-01

Diagnostic tests not supported by M-EOS 9.6.2 and FOS 6.0

The command only prompts you to continue.

switch:admin> supportsave -c

This command will collect RASLOG, TRACE, supportShow, core file, FFDC data

and other support information and then transfer them to a FTP/SCP server

or a USB device. This operation can take several minutes.

NOTE: supportSave will transfer existing trace dump file first, then

automatically generate and transfer latest one. There will be two trace dump

files transfered after this command.

OK to proceed? (yes, y, no, n): [no] y

Diagnostic tests not supported by M-EOS 9.6.2 and FOS 6.0

The diagnostic tests portTest and spinFab are designed to work between two Brocade-attached

switches. These diagnostics will fail if the B-series switch is linked to an M-series switch.