Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference 71

53-1001186-01

cfgRemove

Removes a member from a zone configuration.

Synopsis cfgremove “cfgName”, “member[; member...]”

Description Use this command to remove one or more members from an existing zone configuration.

If all members are removed, the zone configuration is deleted.

This command changes the Defined Configuration (see cfgShow). For the change to become

effective, enable the configuration with the cfgEnable command. For the change to be preserved

across switch reboots, save the configuration to nonvolatile memory with the cfgSave command.

Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

When an FCS policy is enabled, this command can be issued only from the primary FCS switch.

Operands The following operands are required:

“cfgName” Specify a name for the zone configuration, enclosed in double quotation

marks.

“member” Specify a zone member or a list of zone members to be removed from the

configuration. The list must be enclosed in double quotation marks. Members

must be separated by semicolons.

Examples To remove a zone from a configuration:

switch:admin> cfgremove "Test_cfg", "bluezone"

See Also cfgAdd, cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgSave, cfgShow, cfgTransAbort,

cfgTransShow