Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference 839

53-1001186-01

zoneDelete

Deletes a zone.

Synopsis zonedelete "zonename"

Description Use this command to delete a zone.

This command changes the defined configuration. For the change to be preserved across switch

reboots, save the configuration to nonvolatile memory using the cfgSave command. For the change

to become effective, enable the configuration with the cfgEnable command.

Notes When an FCS policy is enabled, this command can be issued only from the primary FCS switch.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command

Availability" for details.

Operands The following operands are required:

"zonename" Specify the name of the zone to be deleted. Quotation marks are optional.

Examples To delete the zone “Blue_zone”:

switch:admin> zonedelete "Blue_zone"

See Also zoneAdd, zoneCreate, zoneRemove, zoneShow