Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference 789

53-1001186-01

tempShow

Displays temperature readings.

Synopsis tempshow

Description Use this command to display the current temperature readings of all temperature sensors in a

switch. For each sensor, this command displays the slot number (if applicable), the sensor state,

and the temperature. The temperature readings are given in both Centigrade and Fahrenheit.

Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command

Availability" for details.

Refer to the hardware reference manual for your switch to determine the normal temperature

range.

Operands none

Examples To display temperature and status sensors:

switch:user> tempshow

Index Slot State Centigrade Fahrenheit

=====================================================

1 1 Ok 41 105

2 2 Ok 39 102

3 3 Absent

4 4 Absent

5 5 Ok 26 78

6 6 Ok 27 80

See Also fanShow, psShow, sensorShow, slotShow