Manualshelf

Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

ManualsBrandsHP ManualsStorageHP StoreFabric 8/24 Bundled FC Switch
681682683684685686687688689690
Fabric OS Command Reference 659
53-1001186-01
portSwapEnable
2
portSwapEnable
Enables the portswap feature.
Synopsis portswapenable
Description Use this command to enable the portswap feature. The portSwap command cannot be used unless
the feature is first enabled with this command.
The enabled state of the portswap feature is persistent across reboots and power cycles.
Enabling or disabling the portswap feature does not affect previously performed portswap
operations.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To enable the portswap feature:
switch:admin> portswapenable
See Also portSwap, portDisable, portEnable, portShow, portSwapDisable, portSwapShow, switchShow