Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference 609

53-1001186-01

portLogPdisc

Sets or clears the debug_pdisc_flag.

Synopsis portlogpdisc 0 | 1

Description Use this command to set or clear the debug_pdisc_flag. This command is part of the environmental

monitor. A setting of 1 will enable logging of Port Discovery parameters. The PDISC log is disabled

by default.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands This command has the following operand:

0|1 Specify 0 to clear or 1 to set the debug_pdisc_flag. The default is 0.

Examples To set the debug_pdisc_flag:

switch:admin> portlogpdisc 1

PDISC log setting = 1