Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

552 Fabric OS Command Reference
53-1001186-01
portCfg
2
To configure the internal addresses for the CP and GbE port inband management interfaces:
switch:admin> portcfg inbandmgmt ge0 ipaddrset cp 192.168.255.1 255.255.255.0
switch:admin> portcfg inbandmgmt ge0 ipaddrset ge 192.168.255.2 255.255.255.0
To add a route to a management station that is on the same subnet as the management interface
IP addresses in the previous example.
switch:admin> portcfg inbandmgmt ge0 routeadd 192.168.3.0 255.255.255.0
To configure a route for a management station that is on a different subnet (note the added
gateway IP address):
switch:admin> portcfg inbandmgmt ge0 routeadd 192.168.3.0 255.255.255.0 192.168.1.250
See Also portCfgShow, portCmd, portShow, switchShow, configure, fastWriteCfg