Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference 551

53-1001186-01

portCfg

To enable Fastwrite and read/write Tape Pipelining on an existing tunnel:

switch:admin> portcfg fciptunnel ge1 modify 0 -f 1

To create a tunnel with Byte Streaming enabled:

switch:admin> portcfg fciptunnel ge0 create 0 90000 -f -bstr

To enable Byte Streaming on an existing tunnel:

switch:admin> portcfg fciptunnel ge0 modify 0 -bstr 1

To create an IP interface using IPv4:

switch:admin> portcfg ipif 4/ge0 create 192.168.100.50 255.255.255.0 1500

Operation Succeeded

To create an IP interface using IPv6 with a prefix:

switch:admin> portcfg ipif 8/ge0 create 2000::800:3333:1234/64 1500

Operation Succeeded

To create a static IP route using IPv4:

switch:admin> portcfg iproute ge0 create 172.16.123.231.255.255.0.0 192.168.255.25 1

Operation Succeeded

To create a static IP route using IPv6:

switch:admin> portcfg iproute 8/ge0 create 3000:4444:800::3456/64 1080::8:800:200C:1234

To create a mirror port:

switch:admin> portcfg mirrorport 2/4 --enable

Please confirm enable of Mirror Port (Y,y,N,n): [n] y

To configure a range of ports as RSCN-suppressed:

switch:admin> portcfg rscnsupr 2/4-7 --enable

To add an entry to the VLAN tag table.

switch:admin> portcfg vlantag8/ge0 add 192.168.10.1 100 3

To delete the entry from the VLAN tag table:

switch:admin> portcfg vlantag8/ge0 delete 192.168.10.1 100

To configure an FCIP Tunnel 1 with FICON XRC and FICON write Tape Pipelining emulation features

enabled using all default parameter arguments:

switch:admin> portcfg ficon ge0 1 -x 1 -w 1

To configure FTRACE with ACo disabled and FTRACE enabled on port ge0/tunnel 3:

switch:admin> portcfg ftrace ge0 3 cfg -a 0 -e 1 -p 5 -s 00000003 -t ffffffff

To delete the FTRACE on the same port/tunnel:

switch:admin> portcfg ftrace ge0 3 del