Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

470 Fabric OS Command Reference
53-1001186-01
nsCamShow
2
Examples To display all switch and device entries discovered by the NS in the fabric:
switch:admin> nscamshow
nscam show for remote switches:
Switch entry for 2
state rev owner
known v430 0xfffc01
Device list: count 1
Type Pid COS PortName NodeName
N 021200; 2,3;10:00:00:60:69:00:ab:ba;10:00:00:60:69:00:ab:ba;
FC4s: FCIP
PortSymb: [28] "SEAGATE ST318452FC 0001"
Fabric Port Name: 20:02:00:60:69:00:68:19
Permanent Port Name: 10:00:00:60:69:00:ab:ba
Switch entry for 4
state rev owner
known v320 0xfffc01
Device list: count 0
No entry is found!
To display the output with the -t option:
switch:admin> nscamshow -t
nscam show for remote switches:
Switch entry for 2
state rev owner
known v430 0xfffc01
Device list: count 1
Type Pid COS PortName NodeName
N 021200; 2,3;10:00:00:60:69:00:ab:ba;10:00:00:60:69:00:ab:ba;
FC4s: FCIP
PortSymb: [28] "SEAGATE ST318452FC 0001"
Fabric Port Name: 20:02:00:60:69:00:68:19
Permanent Port Name: 10:00:00:60:69:00:ab:ba
Device type: Physical Initiator
Switch entry for 4
state rev owner
known v320 0xfffc01
Device list: count 0
No entry is found!
See Also nsAllShow, nsShow, switchShow