Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

224 Fabric OS Command Reference

53-1001186-01

fcpLogEnable

Enables the FCPD debug information log (debug command).

Synopsis fcplogenable

Description Use this command to enable Fibre Channel Protocol daemon (FCPD) logging. Debug information

logging is enabled by default.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands none

Examples To enable the FCPD debug information log:

switch:admin> fcplogenable

See Also fcpLogClear, fcpLogDisable, fcpLogShow