Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 569
53-1000599-02
secPolicyActivate
2
secPolicyActivate
Saves and activates the Defined Security Policy Set.
Synopsis secpolicyactivate
Description Use this command to activate the current defined security policy to all switches in the fabric. This
activates the policy set on the local switch or all switches in the fabric depending on the fabric-wide
consistency policy.
If there are changes to the SCC, DCC, or FCS policies in the current CLI or API transaction that have
not been saved to the Defined Security Policy Set, then this command saves the changes to the
Defined Security Policy Set first, and then activates it. If there are no changes, but the Defined
Security Policy Set differs from the Active Security Policy Set, then the Defined Security Policy Set is
activated. If there are no changes and the Defined Security Policy Set is the same as the Active
Security Policy Set, then nothing is done.
After activation the defined policy set becomes the Active Policy Set.
Use secPolicyShow to display the members of an existing policy in the Active or Defined Security
Policy Sets.
Notes The behavior of this command is the same for tolerant and strict fabric-wide consistency.
When FCS Policy is enabled, this command can be issued only from the Primary FCS switch.
Any modifications to the SCC, DCC, and FCC DB are saved and activated. When secPolicyActivate is
issued after the secPolicySave command, it might fail.
The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
Operands none
Examples To activate the defined security policy set on all switches in the fabric:
switch:admin> secpolicyactivate
About to overwrite the current Active data.
ARE YOU SURE (yes, y, no, n): [no] y
secpolicyactivate command was completed successfully.
See Also fddCfg, secPolicyAbort, secPolicyAdd, secPolicyDelete, secPolicyDump,
secPolicyRemove, secPolicySave, secPolicyShow