Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

548 Fabric OS Command Reference
53-1000599-02
portZoneShow
2
portZoneShow
Displays the enforced zone type of the F_Ports and FL_Ports of a switch.
Synopsis portzoneshow
Description Use this command to display the enforced zone type of the F_ports and FL_Ports of a switch.
Output shows virtual port number (decimal), physical port number (decimal), online status, and if
online, port type. If the current zone configuration has been disabled by cfgDisable, the fabric is in
non-zoning mode, in which all devices see each other. When default zoning is enabled with "No
Access" mode, "No Effective configuration: (No Access)" is displayed.
Operands none
Examples To display the zone membership information of ports:
switch:user> portzoneshow
[OUTPUT TRUNCATED]
PORT: 160 (160) Offline
PORT: 161 (161) Offline
PORT: 162 (162) Offline
PORT: 163 (163) Offline
PORT: 164 (164) Offline
PORT: 165 (165) Offline
PORT: 166 (166) Offline
PORT: 167 (167) Offline
PORT: 168 (168) FL-Port Enforcement: HARD WWN defaultHard: 0 IFID:
0x4332000a
PORT: 169 (169) Offline
PORT: 170 (170) Offline
PORT: 171 (171) Offline
PORT: 172 (172) Offline
PORT: 173 (173) Offline
PORT: 174 (174) Offline
PORT: 175 (175) Offline
PORT: 176 (176) F-Port Enforcement: HARD WWN defaultHard: 0 IFID:
0x4342002a
PORT: 177 (177) Offline
PORT: 178 (178) Offline
PORT: 179 (179) Offline
PORT: 180 (180) Offline
[OUTPUT TRUNCATED]
See Also cfgShow, switchShow