Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-02, June 2008)

Fabric OS Command Reference 353
53-1000599-02
msTdDisable
2
msTdDisable
Disables the Management Server (MS) topology discovery service.
Synopsis mstddisable ["ALL"]
Description Use this command to disable the management server topology discovery service on a local switch
or an entire fabric. This change takes effect immediately and commits to the configuration
database for all affected switches. The change is persistent across power cycles and reboots.
Notes Topology Discovery Management requires the attached devices (including attached switches) to
support request node identification data (RNID) extended link service (ELS).
When FCS policy is enabled, and this command is issued with the "ALL" operand, it can be issued
only from the primary FCS.
The execution of this command is subject to Admin Domain restrictions that may be in place. Refer
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability"
for details.
This command is supported only in AD0 and AD255 contexts.
Operands The following operand is optional:
"ALL” Disables the MS topology discovery service throughout the entire fabric. This
operand must be enclosed in double quotation marks.
Examples To disable the MS topology discovery service on the local switch only:
switch:admin> mstddisable
This may erase all NID entries. Are you sure? (yes, y, no, n): [no] y
Request to disable MS Topology Discovery Service in progress....
done.
*MS Topology Discovery disabled locally.
To disable MS topology discovery on all the switches in the fabric:
primaryfcs:admin> mstddisable "ALL"
This may erase all NID entries. Are you sure? (yes, y, no, n): [no] y
Request to disable MS Topology Discovery Service in progress....
done.
*MS Topology Discovery disabled locally.
*MS Topology Discovery Disable Operation Complete!!
See Also msTdEnable, msTdReadConfig