HP StoreEver 1/8 G2 Tape Autoloader User and Service Guide (AK377-96024, December 2012)

• Status — the overall status of the device
The device is fully operational and no user interaction is required.
User attention is necessary, but the device can still perform most operations.
User intervention is required and the device is not capable of performing some operations.
• Cartridge in Transport — the slot number where the tape currently in the robot originated.
None if there is not a tape in the robotic.
• Odometer — the total number of moves the device has performed since its manufacture.
• Total Power On Time — the number of days, hours, and minutes that the device has been
powered on since its manufacture.
• Robotic Status — the current status of the robotics and a description of the operation the robot
is currently performing.
• Internal Temperature — the internal temperature reported by the device.
• Media Removal — Prevented, if the backup software is preventing media removal from the
device. When media removal is prevented, the mailslot and magazine functionality is disabled.
• Left Magazine — Present, if the device senses the presence of the left magazine.
• Right Magazine — Present, if the device senses the presence of the right magazine.
Viewing dynamic drive information
The Status: Drive page (parallel SCSI), Status: Drive page (FC), and Status: Drive page (SAS)
provide detailed information about the tape drive in the autoloader. When you click Refresh, the
status is updated immediately.
Figure 34 Status: Drive page (parallel SCSI)
44 Operating the tape autoloader