HP StoreEver 1/8 G2 Tape Autoloader User and Service Guide (AK377-96024, December 2012)

Tape drive power indicator
Each tape drive has a green power indicator LED, which indicates that the tape drive is powered
on (see “Tape drive power indicator” (page 15)).
Figure 8 Tape drive power indicator
1. Tape drive power indicator
Controller health status indicator
The controller health status indicator is a green LED that pulses on and off in approximately one
second cycles during normal operation. The LED is located on the back of the device in the lower
right corner, as shown in “Controller health status indicator location” (page 15).
Figure 9 Controller health status indicator location
1. Controller health status LED
Tape drive power indicator 15