6.1 HP IBRIX X9000 Network Storage System File System User Guide (TA768-96061, June 2012)

ibrix_ldapconfig -a -h LDAPSERVERHOST [-P LDAPSERVERPORT] -b LDAPBINDDN
-p LDAPBINDDNPASSWORD -w LDAPWRITEOU -B LDAPBASEOFSEARCH -n NETBIOS -E
ENABLESSL [-f CERTFILEPATH] [-c CERTFILECONTENTS]
The options are:
The LDAP server host (server name or IP address).-h LDAPSERVERHOST
The LDAP server port.-P LDAPSERVERPORT
The LDAP bind Distinguished Name. For example:
cn=hpx9000-readonly-user,dc=enxt,dc=net.
-b LDAPBINDDN
The LDAP bind password.-p LDAPBINDDNPASSWORD
The LDAP write Organizational Unit, or OU (for example,
ou=x9000Config,,ou=configuration,dc=enxt,dc=net).
-w LDAPWRITEOU
The LDAP base for searches (for example, ou=people,cd=enx,dc=net).-B LDAPBASEOFSEARCH
The NetBIOS name, such as X9000.-n NETBIOS
The type of certificate required. Enter 0 for no certificate, 1 for TLS, or 2 for SSL.-E ENABLESSL
The path to the TLS or SSL certificate file, such as /usr/local/ibrix/ldap/
key.pem.
-f CERTFILEPATH
The contents of the certificate file. Copy the contents and paste them between quotes.-c CERTFILECONTENTS
Modify an LDAP configuration:
ibrix_ldapconfig -m -h LDAPSERVERHOST [-P LDAPSERVERPORT] [e|D] [-b
LDAPBINDDN] [-p LDAPBINDDNPASSWORD] [-w LDAPWRITEOU] [-B
LDAPBASEOFSEARCH] [-n NETBIOS] [-E ENABLESSL] [-f CERTFILEPATH] [-c
CERTFILECONTENTS]
View the LDAP configuration:
ibrix_ldapconfig -i
Delete LDAP settings for an LDAP server host:
ibrix_ldapconfig -d -h LDAPSERVERHOST
Enable LDAP:
ibrix_ldapconfig -e -h LDAPSERVERHOST
Disable LDAP:
ibrix_ldapconfig -D -h LDAPSERVERHOST
Configuring LDAP ID mapping
Use the ibrix_ldapidmapping command to configure LDAP ID mapping as a secondary lookup
source for Active Directory. LDAP ID mapping can be used only for CIFS shares.
Add an LDAP ID mapping:
ibrix_ldapidmapping -a -h LDAPSERVERHOST -B LDAPBASEOFSEARCH [-P
LDAPSERVERPORT] [-b LDAPBINDDN] [-p LDAPBINDDNPASSWORD] [-m MAXWAITTIME]
[-M MAXENTRIES] [-n] [-s] [-o] [-u]
This command automatically enables LDAP RFC 2307 ID Mapping. The options are:
The LDAP server host (server name or IP address).-h LDAPSERVERHOST
The LDAP base for searches (for example, ou=people,cd=enx,dc=net).-B LDAPBASEOFSEARCH
The LDAP server port (TCP port 389).-P LDAPSERVERPORT
The LDAP bind Distinguished Name (the default is anonymous). For example:
cn=hpx9000-readonly-user,dc=enxt,dc=net.
-b LDAPBINDDN
66 Configuring authentication for CIFS, FTP, and HTTP