5.6.x HP X9000 Series Network Storage System Installation Guide (TA768-96056, December 2011)

Sample files and command output
This section includes the following:
• An example of a /etc/modprobe.conf file
• Output from /proc/net/bonding/bond*
• IP address configuration files for cluster and user IP addresses
• Output from the ibrix_nic command
Sample /etc/modprobe.conf file
# hostname
x965s1
# more /etc/modprobe.conf
alias eth0 bnx2x
alias eth1 bnx2x
alias eth2 bnx2x
alias eth3 bnx2x
alias eth4 bnx2x
alias eth5 bnx2x
alias eth6 bnx2x
alias eth7 bnx2x
alias scsi_hostadapter cciss
alias scsi_hostadapter1 usb-storage
alias scsi_hostadapter2 ata_piix
options bonding mode=1 max_bonds=3 miimon=100 downdelay=0 updelay=100
alias bond0 bonding
alias bond1 bonding
Output from /proc/net/bonding/bond*
# more /proc/net/bonding/bond*
::::::::::::::
/proc/net/bonding/bond0
::::::::::::::
Ethernet Channel Bonding Driver: v3.2.4 (January 28, 2008)
Bonding Mode: fault-tolerance (active-backup)
Primary Slave: None
Currently Active Slave: eth0
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 100
Down Delay (ms): 0
Slave Interface: eth0
MII Status: up
Link Failure Count: 0
Permanent HW addr: 78:e7:d1:57:e2:c8
Slave Interface: eth3
MII Status: up
Link Failure Count: 0
Permanent HW addr: 78:e7:d1:57:e2:cd
::::::::::::::
/proc/net/bonding/bond1
::::::::::::::
Ethernet Channel Bonding Driver: v3.2.4 (January 28, 2008)
Bonding Mode: fault-tolerance (active-backup)
Primary Slave: None
Currently Active Slave: eth1
MII Status: up
Sample files and command output 79