5.6.x HP X9000 Series Network Storage System Installation Guide (TA768-96056, December 2011)

10. Select Networks from the menu. You will need to create one cluster network interface, which
will be used for intracluster communication. The cluster network is bond0 for a 1GbE network
and is bond1 for a 10GBE network. You might also need to create a user network, which is
used for server-to-client communication. The user network is bond1 for a 1GbE network, and
is a VIF on bond1 for a 10GbE network set up during the configuration of the X9000 software.
To create a bond, select <Add Device>.
You are creating a bonded interface for the cluster network. Select Ok on the Select Interface
Type dialog box.
Configuring the management console 11