HP StorageWorks XP12000 Disk Array Site Preparation Guide (AE002-96040, March 2008)

Maximum configurationMinimum configuration
Cabinet
lbkglbkg
18808531100499Packaged
For each DKC or DKU shipment from the USA to locations outside the USA, add 59 kg (130 lb) for
an international shipping crate. Within the USA, most shipments use a special carrier process in which
frames are shipped without pallets, ramps, and cartons. In these cases, the packaged weight is the
unpackaged weight plus 23 kg (50 lb).
For upgrade DKU packaging (includes a ramp), add 29 kg (65 lb).
The main factor that increases total weight is the number of disk drives. The actual weight is the base
rack weight plus the weight of all additional components installed.
Table 5 provides the approximate weights of additional disk array components when integrated into
a DKC or DKU rack.
Table 5 Component weights
lbkgDescriptionProduct
5022.6Three-phase 30A/60Hz for HP XP12000 DKCAE002A #001
4420Three-phase 30A/50Hz for HP XP12000 DKCAE002A #002
4721.3Single-phase 50A/60Hz for HP XP12000 DKCAE002A #003
3817.2Single-phase 50A/50Hz for HP XP12000 DKCAE002A #004
4420Single-phase 30A/60Hz for standard HP XP12000 DKCAE002A #005
4118.6Single-phase 30A/50Hz for standard HP XP12000 DKCAE002A #006
3515.9Single-phase 30A/60Hz for minimum HP XP12000 DKCAE002A #007
3315Single-phase 30A/50Hz for minimum HP XP12000 DKCAE002A #008
198.6HP XP12000 SVP High Reliability Support KitAE003A
10.5HP XP12000 Power Control Interface Kit for MainframeAE004A
115HP XP12000/10000 16-port 2-Gbps FC CHIPAE006A
135.9HP XP12000/10000 32-port 2-Gbps FC CHIPAE007A
0.040.02HP XP12000 2-Gbps FC SFP Transceiver LWAE008A
135.9HP XP12000/10000 32-port 4-Gbps FC CHIPAE010A
0.040.02HP XP12000/10000 32-port 4-Gbps FC CHIPAE011A
135.9HP XP12000/10000 8-port FICON SW CHIPAE013A
135.9HP XP12000/10000 8-port FICON LW CHIPAE014A
135.9HP XP12000/10000 16-port FICON SW CHIPAE015A
135.9HP XP12000/10000 16-port FICON LW CHIPAE016A
XP12000 Disk Array Site Preparation Guide 21