HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
Whether to transfer the settings audit log file component (audit.log) to the FTP server.
Enable: Transfer settings audit log file component. Disable: Do not settings audit log
file component.
OutFlg
The IP address to which the settings audit log file component is sent. A hyphen (-) is
displayed if you do not change the setting.
SrvAddr
The user name to login to the FTP server. A hyphen (-) is displayed if you do not change
the setting.
UserName
The directory in the FTP server that the transferred settings audit log file components are
stored. A hyphen (-) is displayed if you do not change the setting.
OutputDir
Set Syslog Server operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Audit Log],Set Syslog Server,DetailFlg=Enable,
Normal end,Seq.=xxxxx
+DetailFlg=Enable
+LocationInfo=USP001
+{ServerType,IPAddrVer,OutFlg,SrvAddr,SrvPortNum}=[{Primary,IPv4,Disable,192.168.0.1,514},
{Secondary,-,Enable,192.168.10.111,-}]
[Audit Log]
Audit Log function
Set Syslog Server
Set System Log Server operation
Detail Flag=Enable
Enable is the selected parameter. This operation uses the following parameters, as shown in the
following table.
Table 11 Basic information for Set Syslog Server operation
DescriptionItem
Indicates that the detailed information is output to the syslog
server. Not output if setting is not changed.
DetailFlg=Enable
Parameter
Indicates that the detailed information is not output to the syslog
server. Not output if setting is not changed.
DetailFlg=Disable
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
XP Audit Log reference guide 55