HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

[TC z/OS]
TrueCopy z/OS function (for IBM z/OS)
Change Pair Option
Change Pair Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 223 Detailed information for Change Pair Option operation
DescriptionItem
The CU number and the LDEV number of the main volume where the pair option is
changed.
M-VOL(CU:LDEV)
The changed fence level (the condition that MCU rejects the write operation to the
main volume).
Never: No condition, Data: S-VOL data, Status: S-VOL status
Fence Level
Indicates whether the setting to copy the CFW data to the remote volume is enabled
or not.
Only M-VOL: Copy to main volume only is enabled
Copy To R-VOL: Copy to main and remote volume is enabled
CFW
The error level changed (handling in case of trouble).
This value is output when the pair option of the asynchronous pair is changed only.
Volume: Volume (appropriate volume only is suspended)
Group: Group (suspended by consistency group)
Error Level
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of changed pairs.Num. of Pairs
Clear SIM operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[TC z/OS(R)],Clear SIM,,Normal end,Seq.=xxxxxx
[TC z/OS]
TrueCopy z/OS function (for IBM z/OS)
Clear SIM
Clear Service Information Message (SIM) operation
Normal end
TrueCopy (TC) z/OS function242