HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Change Option operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[TC z/OS(R)],Change Option,,Normal end,
Seq.=xxxxxx
+{ Max Initial Copy,Path Blockade Watch(s),Path Blockade SIM Watch(s) }={128,45,70}
+{CU,Service SIM,PPRC Support,SCP Delay Time(s)}=
-{0x00,Not Report,Yes,600},{0x01,Not Report,Yes,600},{0x02,Not Report,Yes,600},
{0x03,Not Report,Yes,600},{0x04,Not Report,Yes,600},(snip)
-(snip), Num.of CUs=64
[TC z/OS]
TrueCopy z/OS function (for IBM z/OS)
Change Option
Change Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 222 Detailed information for Change Option operation
DescriptionItem
The maximum number of initial copy operations set.Max Initial Copy
The path blockade watch period set. The unit is second.Path Blockade Watch(s)
The path blockade SIM watch period set. The unit is second.Path Blockade SIM Watch(s)
The CU number of the CU on the primary site.CU
Indicates whether the remote copy related SIM is reported or not.
Report, Not Report
Service SIM
Indicates whether the host supports PPRC or not.
Yes: Support, No: Not support
PPRC Support
The SCP delay time when the pair is suspended. The unit is second.SCP Delay Time(s)
The number of CUs set.Num. of CUs
Change Pair Option operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[TC z/OS(R)],Change Pair Option,,Normal end,
Seq.=xxxxxx
+{M-VOL(CU:LDEV),Fence Level,CFW, Error Level,Result}=
-{0x00:0x00,Never,Copy To R-VOL,Group,Normal End},{0x00:0x01,Never,Copy To R-VOL,Group,
Normal End},(snip)
-(snip), Num. of Pairs=xx
XP Audit Log reference guide 241