HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

DescriptionItem
The PPRC TSO command.
16CT Compatible: Format compatible to 16 CT group is used,
Native: Native
PPRC Command
Change CTG Option operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[TC z/OS(R)], Change CTG Option,,Normal end,
Seq.=xxxxx
+{CTG, Offloading(min.),Inflow Control,Copy Pending(min.),RCU Ready(min.),Timer Type}=
{0x00,090,Enable,05,05,System}
[TC z/OS]
TrueCopy z/OS function (for IBM z/OS)
Change CTG Option
Change Consistency Group (CTG) Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 221 Detailed information for Change CTG Option operation
DescriptionItem
The consistency group number of the consistency group (CT group) that the option
is changed.
CTG
The value set to the offloading timer of the sidefile. The unit is minute.Offloading(min.)
Indicates whether the inflow control to the cache is enabled or disabled.
Enable: Setting is enabled, Disable: Setting is disabled
Inflow Control
The setting value for Time Out (Copy Pending). The unit is minute. When Time
Out (Copy Pending) is set to 0 (zero), None is output.
Copy Pending(min.)
The setting value for Time Out (RCU ready). The unit is minute. When Time Out
(RCU ready) is set to 0 (zero), None is output.
RCU Ready(min.)
The timer type set.
System: System timer, Local: Local timer, None: No timer (system timer)
Timer Type
TrueCopy (TC) z/OS function240