HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Performance Control function
Update PPCGrp
Update Prioritized Port Control Group (PPCGrp) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 206 Detailed information for Update PPCGrp operation
DescriptionItem
The operation executed.
Add New Group: Creation of an SPM group
Add WWN: Addition of the host bus adapter to the SPM group
Delete WWN: Deletion of the host bus adapter from the SPM group
UpdateMode
The SPM group name.PPC Group
The attribute of the SPM group.
Prio: Prioritized WWN, Non-Prio: Non-prioritized WWN
This attribute is applied to all host bus adapters that belong to this SPM group.
This value is output only when the SPM group is created.
Priority
The upper limit value applied to the host bus adapters belonging to this SPM group
when the attribute of the SPM group is Non-Prio.
This value is output only when the SPM group is created.
Upper Limit
The type of rate used for the upper limit control.
IOPS: I/O rate, KB/s: Transfer rate
This value is output only when the SPM group is created.
Mode
Indicates WWN of the host bus adapter belonging to this SPM group. WWN is a
16-digit number in the hexadecimal format. All WWNs are output for this index. Up
to 32 WWNs can be registered to one SPM group.
WWN
The number of WWNs of the added or deleted host bus adapter.Num. of WWNs
The number of SPM groups that the setting is changed.Num. of PPC Group
Update WWN operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[PFC],Update WWN,,Normal end,Seq.=xxxxx
+{Update Mode,WWN,Change PPC Name,Change WWN}={Change Nickname,0xXXXXXXXXXXXXXXXX,
XXXXXXXXXXXXXXXX,0xXXXXXXXXXXXXXXXX},Num. of WWNs=1
[PFC]
Performance Control function
Performance Control function224