HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)
21 PORT function
Change Port operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[PORT],Change Port,,Normal end,Seq.=xxxxx
+Attribute=RCU Target
++Port=[1E,3E,5E,7E], Num.of Ports=4
[PORT]
PORT function
Change Port
Change Port operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of the log entry (000000 to 999999)
Detailed Information
Detailed information for this operation is shown in the following table.
Table 165 Detailed information for Change Port operation
DescriptionItem
The attribute of the port after change.
Target: Target port, Initiator: Initiator port,
RCU Target: RCU Target port, External: External port
Attribute
The name of the port where the setting is changed.Port
The name of the port where the setting is changed.Num. of Ports
XP Audit Log reference guide 181