HP StorageWorks XP Audit Log reference guide: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (5697-8004, March 2009)

Seq.=xxxxxx
Sequence number of log information (000000 to 999999)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 78 Detailed information for Open DCR operation
DescriptionItem
The CU number and the LDEV number of the logical volume (for an open system)
where Cache Residency is set.
CU:LDEV
The setting status of Cache Residency.
Set: set, Delete: cancel
Define
The setting mode of Cache Residency. Indicates a dash (-) when Define is Delete.
Bind: Bind mode, Priority: Priority mode
Mode
Indicates whether the Prestaging mode set is enabled or disabled. Indicates a dash
(-) when Define is Delete.
No: Prestaging mode is disabled, Yes: Prestaging mode is enabled
Prestaging
The starting LBA number of the data which Cache Residency was set or canceled.Start LBA
The ending LBA number of the data which Cache Residency was set or canceled.End LBA
The number of Cache Residencies set or canceled.Num of DCR Settings
Patch Edit operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install], Patch Edit,,Normal end,Seq.=xxxxx
+Block=01
++File=Old
+++{Entry,Ctl.,Address,Old Data,New Data,Sum,Comment}=
[{20,20,00000001,00000002,00000002,46,INLINE LCP},
{20,40,00000005,00000002,00000004,65,}], Num. of Data=2
++File=New
+++{Entry,Ctl.,Address,Old Data,New Data,Sum,Comment}=
[{20,20,00000001,00000002,00000002,46, }], Num. of Data=1
+Block=02
++File=Old
+++{Entry,Ctl.,Address,Old Data,New Data,Sum,Comment}=
[{40,00,00000001,00000002,00000002,65,}], Num. of Data=1
++File=New
+++{Entry,Ctl.,Address,Old Data,New Data,Sum,Comment}=
[{40,00,00000001,00000002,00000002,65,}], Num. of Data=0
+Num. of Blocks=2
[Install]
Install function
Patch Edit
Patch Edit operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Install function114