HP StorageWorks Fabric OS 5.X MIB Reference Guide (AA-RVHXB-TE, September 2005)

Fabric OS 5.x MIB reference guide 61
UDP listener table
The UDP listener table contains information about this entity’s UDP end-points on which a local application
is currently accepting datagrams.
udpTable
OID 1.3.6.1.2.1.7.5
Description A table containing UDP listener information.
udpEntry
OID 1.3.6.1.2.1.7.5.1
Description Information about a particular current UDP listener.
Index udpLocalAddress, udpLocalPort
udpLocalAddress
OID 1.3.6.1.2.1.7.5.1.1
Description The local IP address for this UDP listener. In the case of a UDP listener that is willing to
accept datagrams for any IP interface associated with the node, the value 0.0.0.0 is
used.
udpLocalPort
OID 1.3.6.1.2.1.7.5.1.2
Description The local port number for this UDP listener.
EGP group
Implementation of the EGP group is mandatory for all systems that implement the EGP.
NOTE: HP does not support the EGP Group; this section is not applicable. See the RFC1213 for
complete information regarding the EGP Group.
Transmission group
Based on the transmission media underlying each interface on a system, the corresponding portion of the
Transmission group is mandatory for that system.
When Internet-standard definitions for managing transmission media are defined, the transmission group is
used to provide a prefix for the names of those objects.
Typically, such definitions reside in the experimental portion of the MIB until they are proven; then, as a
part of the Internet standardization process, the definitions are accordingly elevated and a new OID under
the transmission group is defined. By convention, the name assigned is
type Object Identifier ::= { transmission number }
where type is the symbolic value used for the media in the ifType column of the ifTable object, and
transmission number is the actual integer value corresponding to the symbol.