HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 299
Severity
INFO
PDTR-1002
Message
Probable Cause
This message indicates that information has been written to the panic dump and core dump files and a
trap generated. The watchdog register codes are as follows:
• 0x10000000 bit set means that the watch dog timer (WDT) forced a core reset.
• 0x20000000 bit set means that the WDT forced a chip reset.
• All other code values are reserved.
Recommended Action
Run the pdShow command to view the panic dump and core dump files.
Severity
INFO
PLAT Error Messages
PLAT-1000
Message
Probable Cause
Indicates that nonrecoverable PCI errors have been detected.
Recommended Action
The system will be faulted and might automatically reboot.
If the system does not reboot, then try issuing a reboot command from a command-line prompt.
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and
contact your switch service provider.
Severity
CRITICAL
PLAT-1001
Message
<timestamp>, [PDTR-1002], <sequence-number>,, INFO, <system-name>,
< informational message >
<timestamp>, [PLAT-1000], <sequence-number>,, CRITICAL,
<system-name>, <Function name> <Error string>
<timestamp>, [PLAT-1001], <sequence-number>,, INFO, <system-name>,
Resetting standby CP (double reset may occur).