HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

298 Error messages
PDM-1020
Message
Probable Cause
Indicates that the indicated file path name is too long. The limit is 49 characters.
Recommended Action
Use short path name for the files to be replicated.
Severity
WARNING
PDM-1021
Message
Probable Cause
Indicates that a system call failed.
Recommended Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
PDTR Error Messages
PDTR-1001
Message
Probable Cause
Indicates that information has been written to the panic dump files. The watchdog register codes are as
follows:
• 0x10000000 bit set means that the watch dog timer (WDT) forced a core reset.
• 0x20000000 bit set means that the WDT forced a chip reset.
• All other code values are reserved.
Recommended Action
Run the pdShow command to view the panic dump and core dump files.
<timestamp>, [PDM-1020], <sequence-number>,, WARNING,
<system-name>, Long path name (<Path>/<File Name>), Skip
<timestamp>, [PDM-1021], <sequence-number>,, WARNING,
<system-name>, Failed to download area port map
<timestamp>, [PDTR-1001], <sequence-number>,, INFO, <system-name>,
< informational message >