HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

294 Error messages
Severity
WARNING
PDM-1006
Message
Probable Cause
Indicates that the configuration file sync.conf contains too many entries.
Recommended Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1007
Message
Probable Cause
Indicates that the PDM process failed to create the specified file name.
Recommended Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1008
Message
Probable Cause
Indicates that the PDM system call to getcfg failed.
Recommended Action
Run the firmwareDownload command to reinstall the firmware.
<timestamp>, [PDM-1006], <sequence-number>,, WARNING,
<system-name>, Too many files in sync.conf
<timestamp>, [PDM-1007], <sequence-number>,, WARNING,
<system-name>, File not created: <file name>
<timestamp>, [PDM-1008], <sequence-number>,, WARNING,
<system-name>, Failed to get the number of uports