HP StorageWorks Fabric OS 5.X Diagnostics and System Error Messages Reference Guide (AA-RVHZB-TE, September 2005)

Fabric OS 5.x diagnostics and system error messages reference guide 293
PDM-1003
Message
Probable Cause
Indicates that a syntax error occurred when trying to launch the PDM process.
Recommended Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1004
Message
Probable Cause
Indicates that the PDM process ran out of memory.
Recommended Action
Reboot or power cycle the switch.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
PDM-1005
Message
Probable Cause
Indicates that the PDM failed to register to the FSS.
Recommended Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
<timestamp>, [PDM-1003], <sequence-number>,, WARNING,
<system-name>, pdm [-d] -S <service> -s <instance>
<timestamp>, [PDM-1004], <sequence-number>,, WARNING,
<system-name>, Memory shortage
<timestamp>, [PDM-1005], <sequence-number>,, WARNING,
<system-name>, FSS register failed