HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 785
snmpMibCapShow
Displays options for configuring SNMP MIB trap capability.
supportShow
Displays switch information for debugging purposes.
supportShowCfgDisable
Disables a group of commands under the supportShow command.
supportShowCfgEnable
Enables a group of commands under the supportShow command.
supportShowCfgShow
Displays the groups of commands enabled for display by the
supportShow command.
switchBeacon
Sets switch beaconing mode on or off.
switchCfgPersistentDisable
Disables a switch persistently.
switchCfgPersistentEnable
Enables a switch persistently.
switchCfgSpeed
Configures all ports of a switch to a particular speed.
switchCfgTrunk
Enables or disables trunking on all the ports of a switch.
switchDisable
Disables the switch.
switchEnable
Enables the switch.
switchName
Displays or sets the switch name.
switchShow
Displays switch and port status.
switchStatusPolicySet
Sets the policy parameters that determine overall switch status.
switchStatusShow
Displays the policy parameters that determine overall switch status.
switchStatusShow
Displays overall switch status.
switchUptime
Displays the amount of time the switch has been operating.
syslogdIpAdd
Adds the IP address of a syslog daemon.
syslogdIpRemove
Removes the IP address of a syslog daemon.
syslogdIpShow
Displays all syslog daemon IP addresses.
systemVerification
Runs a suite of diagnostic tests on all switches in a fabric.
tempShow
Displays temperature readings.
timeout
Sets or displays the idle timeout value for a login session.
topologyShow
Displays the unicast fabric topology.
traceDump
Displays, initiates, or removes a trace dump.
traceFtp
Displays, enables, or disables the trace auto-FTP or FTPsa trace dump
file to the customer FTP server.
Table 28 switchAdmin commands (continued)
Command Description