HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

672 Fabric OS commands
Examples
To save RASLOG, TRACE, and supportShow information to an FTP server in non-interactive mode:
To save RASLOG, TRACE, and supportShow information to an FTP server in interactive mode on a
dual-CP system:
See also
supportFtp
switch:admin> supportsave -n -u admin -p pass -h 192.168.1.1 -d tmp
Saving support information for module RASLOG...
...ortSave_files/switch-S5-200405200010-errDumpAll.ss: 1.66 kB
566.47 B/s
Saving support information for module TRACE...
...ortSave_files/switch-S5-200405200010-tracedump.dmp: 10.00 MB
848.00 kB/s
Saving support information for module SUPPORTSHOW...
...rtSave_files/switch-S5-200405200014-supportShow.ss: 1.11 MB
346.39 kB/s
switch:admin> supportsave
This command will collect RASLOG, TRACE, supportShow and other support
information and then transfer them to a FTP server. Only the local CP's
information will be saved
and supportShow information is only available on the Active CP. This
operation
can take several minutes. OK to proceed? (yes, y, no, n): [no] y
Host IP: 192.168.1.1
User Name: admin
Password:
Remote Directory: tmp
Saving support information for module RASLOG...
...ortSave_files/switch-S5-200405200010-errDumpAll.ss: 1.66 kB
566.47 B/s
Saving support information for module TRACE...
...ortSave_files/switch-S5-200405200010-tracedump.dmp: 10.00 MB
848.00 kB/s
Saving support information for module SUPPORTSHOW...
...pportSave_files/switch-S5-200405200014-supportShow: 1.11 MB
346.39 kB/s